Andreas Hettich GmbH & Co. KG

Products from this manufacturer

Swing-bucket rotor

for HET 1206, 4 places, without bucket, up to 90° angle

Product number: HET 1624

400,00 €

/ 1 piece(s)

On backorder, will be delivered as soon as possible

Light metal carrier for max. 1 x 290 ml, suitable for rotor 1754

- for ROTINA 380/ ROTINA 380 R

Product number: HET 1752

190,00 €

/ 1 piece(s)

On backorder, will be delivered as soon as possible

ROTOFIX 32A benchtop centrifuge, 208-240 V, without rotor

It is a rugged, versatile and indispensable centrifuge for routine laboratory tasks in medical practices and small hospitals as well as industrial laboratories.But not only is the Rotofix 32 A ideally equipped for tasks in clinical chemistry, it can also play a vital role in cytology. And this versatile centrifuge can handle a lot more than medical applications.Its comprehensive range of accessories make it suitable for use in research and analytical laboratories in chemistry, pharmacy and biotechnology. It can be used to check the status of chrome baths with special tubes from Hettich.Metal casing and lid, centrifugation chamber of rust-free stainless steel, clip closure. View port in centrifuge lid. The practical film keyboard enables parameters to be entered precisely, quickly and simply through the keys. The current status of all parameters is displayed during centrifugation. The speed is entered in increments of 100 and the centrifugation time is selected in minutes (up to 99); the centrifuge can also be set to run continuously. Pulse key for short centrifugation runs. The RCF is displayed for as long as the RCF button is pressed. The rotor radius must be entered prior to this. The lid of the centrifuge can be comfortably and reliably closed using the ergonomic closure, lid locking and holding, imbalance switch off, automatic rotor recognition.max. capacity in a swing-out rotor: 4 x 100 mlin an angle rotor: 6 x 85 mlmax. speed (RPM): 6000max. RCF: 4226dimensions (H x W x D): 257 x 366 x 430 mmweight: approx. 23 kgrefrigeration: air coolingFrequently used rotors: swing-out rotor for 4 x 100 ml (90°), max. RCF 2630 - Cat. No. 1324

Product number: HET 1206

2.146,00 €

/ 1 piece(s)

On backorder, will be delivered as soon as possible

Rubber inlay for tube, 15 ml cylindric a. conic, Ø 18,2 x 4,8 mm

Product number: HET 0715

2,05 €

/ 1 piece(s)

On backorder, will be delivered as soon as possible

MIKRO 200 R microlitre centrifuge without rotor, refrigerated 200-240 V

max. speed: 15,000 min-1, max. RCF: 21.382, automatic lid locking, Parameters can be rapidly selected and values entered using the rotary button, 4 memory storage spaces, adjustable temperature range -10°C bis +40°C, pre-cooling funktion and stand-by cooling- suitable rotors: 2424-B, 2427-A, 2430-B, 2418-A, 2426-B- dimensions (H x W x D): 260 x 275 x 344 mm- weight: approx. 28 kg

Product number: HET 2405

5.149,00 €

/ 1 piece(s)

On backorder, will be delivered as soon as possible

Swing-out rotor 8-ply f. Falcon tubes 50 ml

- 29 x 115 mm- complete with pendants- angle up to 45°- for ROTOFIX 32, UNIVERSAL 32 / 32R

Product number: HET 1617

706,00 €

/ 1 piece(s)

On backorder, will be delivered as soon as possible

Cyto-chamber with seal, PP, 8 ml 1-ply #1666-100#

- Ø 17.5/240 mm²

Product number: HET 1666-100

3,99 €

/ 1 piece(s)

On backorder, will be delivered as soon as possible

Angle rotor 12 x 15 ml complete with sleeves, angle 35°

- complete with sleeves, PA, anlge 35°- for MIKRO 22 / 22R

Product number: HET 1015

442,00 €

/ 1 piece(s)

On backorder, will be delivered as soon as possible

Rubber inlay for tubes 100 ml, dia. 41 mm, length 15 mm

- suitable for 1381, 1430- for ROTOFIX 32, UNIVERSAL 32 / 32R, ROTINA 38 / 38R

Product number: HET 0761

25,50 €

/ 1 piece(s)

On backorder, will be delivered as soon as possible

Swing-out rotor 6-ply f. Falcon tube 50 ml

- 29 x 115 mm- complete with pendants- angle up to 90°- for ROTOFIX 32, UNIVERSAL 32 / 32R

Product number: HET 1619

750,00 €

/ 1 piece(s)

On backorder, will be delivered as soon as possible

MIKRO 200 microlitre centrifuge without rotor 200-240 V, without rotor

Max. speed: 15,000 min-1, max. RCF: 21.382, motor-driven lid closure, parameters can be rapidly selected and values entered using the rotary button, 4 memory spaces- suitable rotors: 2418-A, 2428, 2434, 2437- dimensions (H x W x D): 260 x 275 x 344 mm- weight: approx. 11.5 kg

Product number: HET 2400

2.062,00 €

/ 1 piece(s)

On backorder, will be delivered as soon as possible

Filter cards 1-ply, f. 1666 (100 pcs.)

Product number: HET 1676

32,00 €

/ 1 package

On backorder, will be delivered as soon as possible

ROTINA 380 benchtop centrifuge, 208-240 V, without rotor

! Briefing necessary, customer has to bear the costs !High performance centrifuge, wherever centrifuges are incorporated to working processes, they need to deliver good separation results quickly and safely, with lid locking, 98 program storage spaces, simple operation via membrane keypad and rotary knob, capacity: 4 x 290 ml, max. rotation rate: 15,000 min. - 1, max. RCF: 24,400- 8 rotors for selection- dimensions (H x W x D): 418 x 457 x 600 mm- weight: approx 51 kg

Product number: HET 1701

4.720,00 €

/ 1 piece(s)

On backorder, will be delivered as soon as possible

*Lid, PEI, for carrier 1752 with biosealing

- for ROTINA 380/ ROTINA 380 R

Product number: HET 1751

58,00 €

/ 1 piece(s)

On backorder, will be delivered as soon as possible

Adapter, 5-ply

5 x 1.6- 7 ml (PP) for tubes 13 x 75/100 mm or5 x 2.6- 4,9 ml (PP) for tubes 13 x 65/90 mm or5 x 2.7- 3 ml (PP) for tubes 11 or 11.5 x 66/92 mm or5 x 4.5- 5 ml (PP) for tubes 11 or 11.5 x 66/92 mm oder5 x 4.9 ml (PP) for tubes 13 x 90 mm or5 x 5 ml (PP) for tubes 13 x 75 mm5 x 6- 7 ml (PP) for tubes 12 x 82/100 mm- suitable 1381, 1430, 1390- für ROTOFIX 32A, UNIVERSAL 320 / UNIVERSAL 320 R, ROTINA 38 / 38 R, ROTINA 420 / 420 R

Product number: HET 1383

69,00 €

/ 1 package

On backorder, will be delivered as soon as possible

MIKRO 185 microlitre centrifuge without rotor

The Mikro 185 requires little space on the laboratory bench. It is the smallest member of the microcentrifuge range of Hettich and is ideal as a personal centrifuge for researchers in life sciences. The centrifuge has a capacity of 24 reaction tubes. This microcentrifuge enables separation steps required for sample preparation in various molecular biology applications to be performed rapidly and reliably. For very short centrifugation runs, for example to centrifuge down droplets, it is sufficient to press the pulse button. The centrifuge runs for as long as the button is held down, at the pre-selected speed.Small and easy to transport. In addition to holding 1.5 / 2.0 ml standard tubes, it can also hold 0.2 ml PCR tubes or 0.5 ml tubes if adapters are used. The centrifuge is operated through a user-friendly keypad. The control system for the MIKRO 185 is tailored to the requirements for a personal centrifuge. The focus is on the main parameters without the use of programs: the run time and speed can be selected by pressing a button. The lid is opened by simply pressing a button.dimensions (H x W x D): 228 x 261 x 353 mmweight: approx. 10 kgmax. capacity: 24 x 1.5 / 2.0 mlmax. speed: 13300 min-1max. RCF: 17008

Product number: HET 1203

1.411,00 €

/ 1 piece(s)

On backorder, will be delivered as soon as possible

EBA 270 small centrifuge, 200-240 V with swing out rotor

Small centrifuge with a swing-out rotor that has been specially developed for use in medical practices.It is particularly suitable for the centrifugation of sample tubes containing a separating gel and delivers separation results comparable to those of a large centrifuge. The EBA 270 can be used for the usual blood collection tubes and urine tubes up to a volume of 15 ml at a maximum rpm of 4,000. This corresponds to an RCF of 2,254. Many manufacturers of gel tubes recommend their centrifugation in a swing-out rotor. With such rotors sedimentation is in the direction of the tube axis, so that the tube contents form horizontal layers of uniform thickness. Sample preparation can then be carried out by the analytical instrument. The EBA 270 delivers optimum separation results and a horizontal separation layer exactly like that seen with a large centrifuge. The samples are thus optimally prepared for analysis.Supplied with a 6-fold Swing-out rotor, metal lid, centrifugation chamber of rust-free stainless steel. Plastic casing that is smooth and easy to clean. The lid is opened by pressing a button, pulse button for short centrifugation steps. The speed and run time of the centrifuge can be varied for different applications: the rpm value is entered in increments of 100 and the time in minutes (up to 99). Lid locking and holding during rotor run, emergency lid lock release, lid closure made of metal, imbalance switch-off. The motor has elastic bearings: If there is a slight imbalance the centrifuge will still run quietly and stay in position.- dimensions (H x W x D): 239 x 326 x 400 mm- weight: approx. 14 kg- max. capacity: 6 x 15 ml- max. speed: 4000 min-1- max. RCF: 2254

Product number: HET 2300

1.332,00 €

/ 1 piece(s)

On backorder, will be delivered as soon as possible

Light metal hangers rectangular

- suitable for rotor 1494, 1724, 4754- for UNIVERSAL 320 / UNIVERSAL 320 R, ROTINA 38 / 38 R, ROTINA 420 / 420 R- for max. 50 ml tubes

Product number: HET 1427

211,00 €

/ 1 piece(s)

On backorder, will be delivered as soon as possible

EBA 200S small centrifuge with angle rotor

The EBA 200 is the ideal centrifuge for medical practices. It has a maximum RCF of 3,461 and can hold a variety of sample tubes. The more powerful EBA 200 S model has a maximum RCF of 6,153 and is designed for use in laboratories handling emergency samples, where every minute counts. Its high speed enables a shorter centrifugation time so that plasma with a low platelet count can be derived for analysis in just a few minutes.Angle rotor, 8-place (rotor include. Its small format means it frees up space on the lab bench. It can be easily moved from one position to another. It is supplied with a rotor. No installation is required before the centrifuge can be used for the first time. It is easy to operate. Simple entry of speed and run time, the lid can be closed with one hand. The lid is opened by pressing a button, pulse button for short centrifugation runs. Practical E control panel: Parameters are entered via a foil keyboard. Lid closure mechanism that meets accident prevention requirements. The lid locking mechanism only allows the lid to be opened after the rotor has come to a complete standstill. The casing and lid are manufactured from an impact-resistant plastic, protection against overheating.- dimensions (H x W x D): 228 x 261 x 353 mm - weight: approx. 11 kg- max. capacity: 8 x 15 ml- max. speed: 8000 min-1- max. RCF: 6153

Product number: HET 1802

2.295,00 €

/ 1 piece(s)

On backorder, will be delivered as soon as possible

Light metal hanger for 1 x 100 ml

suitable for rotor 1624 for tubes 44 x 100 mm

Product number: HET 1481

136,00 €

/ 1 piece(s)

On backorder, will be delivered as soon as possible

Cyto-chamber with seal, PP, 1 ml 1-ply #1663-100#

- Ø 6.2/30 mm²

Product number: HET 1663-100

3,99 €

/ 1 piece(s)

On backorder, will be delivered as soon as possible

Angle rotor

for HET 1203, 24 places, incl. lid with biological seal, autoclavable and phenol-resistant, for 0.2 - 2.0 ml microtubes, 45° angle

Product number: HET 1226-A

396,00 €

/ 1 piece(s)

On backorder, will be delivered as soon as possible

Swing out rotor 4-ply, without carrier, up to angle 90°

- for ROTINA 380 / ROTINA 380 R

Product number: HET 1754

1.228,00 €

/ 1 piece(s)

On backorder, will be delivered as soon as possible

ROTINA 380 R benchtop centrifuge, cooled, 200-240 V, without rotor

! Briefing necessary, customer has to bear the costs !High performance centrifuge which provides seperation results for highest needs. Cooled benchtop centrifuge with adjustble temperature range from - 20 °C to + 40 °C, with electric lid locking, 98 program storage spac, simple operation via membrane keypad and rotary knob, capacity: 4 x 290 ml, max. rotation rate: 15,000 min -1, max. RCF: 24,400- 8 rotors for selection- dimenstions (H x W x D): 418 x 457 x 750 mm- weight: approx. 81 kg

Product number: HET 1706

7.859,00 €

/ 1 piece(s)

On backorder, will be delivered as soon as possible